AI Theta Retrofit Ceiling Mount
UniFi AI Theta Flush Drywall Ceiling Mount Kit – 3-Inch Cutout Retrofit with 4 Angle Sleeves & Spring Clips by WidgetsInc
Ubiquiti engineered the AI Theta with industry-leading discrete optics, but factory mounting systems assume open-plenum commercial ceilings. In finished residential homes, routing cables and mounting the processing hub normally requires large exploratory drywall cuts. The WidgetsInc Retrofit Ceiling Mount transforms installation into a single 3-inch hole-saw operation — 100% from below. No attic or rear crawlspace access needed.
KEY FEATURES
• Engineered for residential drywall: clean, flush installation in finished sheetrock ceilings where rear crawlspace access is non-existent.
• Standard 3" hole-saw cutout: feed the bulky AI Theta hub, factory cable connectors, and terminations straight through the front opening — no drywall patching or repainting.
• Complete 4-in-1 angle kit: four interchangeable sleeves — 0° (straight-down: doorways, counters), 20° (low ceiling sweeps, wide rooms), 40° (hallways, perimeter entry), 60° (high ceilings, tall entryways) — plus continuous rotational pivot adjustment to eliminate blind spots.
• Tool-free front servicing: dual high-tension torsion spring clips hold firm against ceiling vibration, yet pull down smoothly for fast sleeve swaps without cracking drywall.
• Custom-fit friction sleeve holds the standard Ubiquiti UniFi AI Theta camera head securely on axis.
SPECIFICATIONS
• Required cutout: standard 3.0" (76mm) hole saw (or drywall jab saw)
• Ceiling substrates: drywall/sheetrock, wood paneling, ceiling tile — 1/2" to 1" thick
• Retention: dual high-tension spring-loaded clamping arms (6-32 x .375" hardware)
• Camera compatibility: Ubiquiti UniFi Protect AI Theta (standard model; AI Theta Pro variant coming soon)
• Tools required: electric drill + 3" hole saw only. No screws, anchors, or drywall mud.
IN THE BOX
• (1) WidgetsInc AI Theta flush ceiling bezel frame
• (2) Pre-installed drywall spring clamping arms
• (1) 0° camera sleeve, (1) 20° camera sleeve, (1) 40° camera sleeve, (1) 60° camera sleeve
• UniFi AI Theta camera, hub, and cables sold separately.
FAQ
• Does this work with the AI Theta Pro? This kit is custom-fit for the standard UniFi AI Theta camera lens. A dedicated AI Theta Pro variant is in testing and coming soon.
• Do I need attic or rear crawlspace access? No. Cut a 3" hole from below, pass the AI Theta hub into the ceiling void, connect the lens cable, and snap the mount into place — 100% from the room.
• Can I change the angle sleeve after installation? Yes. Pull down gently on the bezel until the spring clips clear the hole, swap to any of the 4 included sleeves, adjust rotational alignment, and push it back flush.
• Will the spring tension damage drywall? No. The clips hold firm against ceiling vibration but release with smooth friction bends that slide down without cracking or tearing drywall.
• What tools are required? All you need is an electric drill with a standard 3-inch hole saw (or a drywall jab saw).
WARRANTY: 1-year warranty.
